Applications

Inside Duct, Pulled or Blown

Cable Construction

288 low water peak single mode fibers in compliance with ITU-T-G.652D

Metallic / Non metallic element used as central strength member for Tensile Strength Loose buffer tubes

jelly filled Loose buffer tubes S-Z Stranded

Cable core filled with jelly S-Z core wrapped with polyester tape UV stabilized PE outer sheath, black

Loose tube, 6 Fiber, 2 FRP Strength member & black HDPE sheathed cable

Special Features

Flexible buffer tubes provide easy fiber routing inside closure

Lighter weight cable for fast and easy installation

Cable Bending Radius (IEC 60794-1-2-E11A)

During Installation                              20D, D=Cable Diameter

Installed                                              15D, D=Cable Diameter

Repeated Bending                              30 Cycle, r=20D, 5 Kg

(IEC 60794-1-2-E6)                             Load, D=Cable Diameter

Tensile Force (IEC 60794-1-2-E1)

During Installation                                              3000 N

Installed                                                               1500 N

Torsion Resistance (IEC 60794-1-2-E7)          10 Cycle (± 360°) 5 Kg, weight, L=1 Mtr

Crush Resistance (IEC 60794-1-2-E3)             1500 N (100 X 100 mm) for 60 sec

Kink Resistance (IEC 60794-1-2-E10)              15D, D=Cable Diameter

Water Penetration (IEC 60794-1-2-F5B)         1 Mtr Water Head,3 Mtr Cable Sample, 24 Hours

Variants*

*Cable can be supplied with single mode (ITU-T-G652, G655, and G657)

& Multimode (50μm & 62.5μm)

*Outer Jacket can be of PVC, LSZH, and HDPE

*Strength member can be Steel or FRP

*These are general characteristics; customized designs are available as per requirements