Applications

Inside Duct, Pulled or Blown For CATV applicaton, aerial applicaton along with messenger wire

Cable Construction

Up to 144 low water peak single mode

fibers in compliance with ITU-T-G.652D Metallic / Non metallic element used as central Strength Member for Tensile Strength

Loose buffer tubes jelly filled Loose buffer tubes S-Z Stranded Cable core filled with jelly

S-Z core wrapped with polyester tape UV stabilized PE outer sheath, black

Loose tube, 4 Fiber, 2 FRP Strength member & black HDPE sheathed cable

Special Features

Flexible buffer tubes provide easy Ber routing inside closure Lighter weight cable for fast and easy installation

Cable Bending Radius (IEC 60794-1-2-E11A)

During Installation                      20D, D=Cable Diameter

Installed                                     15D, D=Cable Diameter

Repeated Bending                      30 Cycle, r=20D, 5 Kg

Tensile Force (IEC 60794-1-2-E1)

During Installation                                                1800 N

Installed                                                                 1000 N

Torsion Resistance (IEC 60794-1-2-E7)            10 Cycle (± 360°) 5 Kg,Weight, L=1 Mtr

Crush Resistance (IEC 60794-1-2-E3)               1800 N (100 X 100 mm)for 60 sec

Kink Resistance (IEC 60794-1-2-E10)               10D, D=Cable Diameter

Variants*

*Cable can be supplied with single mode (ITU-T-G652, G655, and G657) & Multimode (50μm & 62.5μm)

*Outer Jacket can be of PVC, LSZH, and HDPE

*Strength member can be Steel or FRP

*These are general characteristics; customized designs are available as per requirements